CASE
Focus on the R&D and design of high-quality sand and gravel aggregate shaping, sand making equipment, and recycled aggregate preparation
VSI shaping sand making machine with European technology
Release Time：
2022-02-28
0.075-40mm raw materials are transported to the raw material silo. The raw material silo adopts a concrete silo structure. There is a frequency conversion metering belt at the bottom of the silo, through which the production line is evenly fed and the hourly output can be displayed. The unloading silo is designed with a vibrating anti-blocking mechanism. To ensure smooth feeding. The raw materials are conveyed to the shaping machine for crushing and shaping through the belt, and then lifted to the top of the crushing main building
0.075-40mm raw materials are transported to the raw material silo. The raw material silo adopts a concrete silo structure. There is a frequency conversion metering belt at the bottom of the silo, through which the production line is evenly fed and the hourly output can be displayed. The unloading silo is designed with a vibrating anti-blocking mechanism. To ensure smooth feeding. The raw materials are transported to the shaping machine for crushing and shaping through the belt, and then lifted to the top of the crushing main building, and fed to the screening machine through the overhead belt or vibrating. Super-sized particles), one of which is 0-5mm sand, and the rest are three kinds of aggregates (generally: 5-10mm, 10-20mm, 20-30mm, and the screen can also be designed according to user needs to meet the discharge specifications) The sand is transported to the designated storage yard by the respective belt conveyors, and the sand enters the storage yard after passing through the humidifier (for example, with mortar, the sand can be directly transported to the sand storage tank without humidification). The super-sized particles are circulated into the shaping machine to be crushed and shaped again, and the cycle continues. The equipment is equipped with multi-point powder dust removal and unpowered eddy current powder separator (patented technology). Under the action of the induced draft fan, the dust passes through the recovery channel, and the coarse particles are also blocked in the channel. The stone powder passes through the dust removal pipeline and passes through the recovery filter before entering the dust collector to recover the fine sand in the powder, which increases the amount of fine sand recovered and improves the purity and value of the stone powder (above 200 mesh). The 0-4.75mm sand in the finished material enters the humidifier for uniform stirring to prevent the sand from segregating, and then is transported to the finished product silo through the discharge belt conveyor. The head of the conveyor belt conveyor for conveying and shaping the finished aggregate can be equipped with a spray device to prevent dust and segregation.
Related News
Tik Tok
Fujian Green Energy Environmental Protection Technology Co., Ltd.
Service Hotline：4006655896
Tel：0595-22557155、13808548004
Email：nonnon@fjlnkj.com
Website：http://www.fjlnkj.com/
Factory Address: Hardware and Electromechanical Industrial Park, Luojiang Economic Development Zone, Quanzhou City, Fujian Province (No. 268, Luobin North Road)
Page Copyright © 2022 Fujian Green Energy Environmental Protection Technology Co., Ltd.